IF IOS IS ENABLED, BT IS NOT WORKING ON WINDOWS, SEE BELOW
==========================================================


spp-r310-ii bt-driver installation
===================================

switch spp-r310-ii on
run bt search on tablet
select spp-r310-ii and pair, PW: 0000
==> connected

check and remember BT outgoing serial port No.
===> ok

install win driver as admin
select comx (BT outgoing serial port)
reboot

(remember printer name for tcpos demo ini file)

19.4.2018 fe

=====================================

Make sure that MFi mode must be on.
IF NOT, DISABLE IOS Bluetooth connection

3-1 
Set-up by printer button
- Turn on the printer power. 
- Push the power button and feed button for 2 seconds while paper cover is opened. 
- After beep sound, close the cover. 
- Reboot the printer after checking below message. iOS mode enable!! 
- Please Reboot Printer!! 
- Repeat above procedure to make MFi mode disable.


20.4.2018 FE